JOHN P. CONOVER / SIMPLE PICTURES
  • Home
  • About
  • Galleries
Today we accomplished the following:
  • Radiused the starboard hull-length stringer that was applied last week
  • Glued and clamped the port hull-length stringer
  • Cut remaining batten grooves for the aft portion of the hull
  • Laid out groove locations for the forward section battens - six more battens
  • Rough-cut intermediate frames for engine support
  • Began the fitting of the first piece of marine plywood!!!

© 2020 All Rights Reserved johnpconover PHOTOGRAPHY . About .Contact (303)828-7952
  • Home
  • About
  • Galleries