JOHN P. CONOVER / SIMPLE PICTURES
  • Home
  • About
  • Galleries
  • Crandall Flyer
    • 2016 - October through December >
      • October 25, 2016 - Milling Lumber for the Jig
      • November 1, 2016 - Building the Flyer Jig
      • November 8, 2016 - Frame Construction
      • November 15, 2016 - Cutting Frame Pieces
      • November 29, 2016 - Working with Patterns
      • December 6, 2016 - Assembling a Frame
      • December 13, 2016 - Keels and Stringers
      • December 27, 2016 - Bending the Wood
    • 2017 - January through March >
      • January 10 - 24 - Continuing with Frames
      • February 14-15, 2017 - Keels and Beams
      • February 21, 2017 - Attaching Beams to Frames
      • March 7, 2017 - Gluing Up
      • March 14, 2017 - Gluing Frames to Keels and Keelsons
      • March 21, 2017 - Attaching Laminated Battens
    • 2017 - April through June >
      • April 6, 2017 - Scarfing Battens
      • April 13, 2017 - Preparing the Long Stringers
      • April 20, 2017 - More Grooves and Port Long Stringer
      • April 27, 2017 - Points at both ends
      • May 4, 2017 - Reinforcement for the engine compartment
      • May 11, 2017 - Port Stringer and Forward Battens
      • June 1, 2017 - Flipping the Boat
      • June 22, 2017 - Uprighting the Flyer
    • 2017 - July through September >
      • July 1 - 15, 2017 - Finishing the Frame
      • July 20 - 27, 2017 - Veneering the Flyer
      • August 31, 2017 - Adding a Second Layer
      • September 7, 2017 - Starboard Second Layer
      • September 14, 2017 - Port Side Second Layer
      • September 21, 2017 - Adding a Third Layer
      • September 28, 2017 - Adding a Third Layer (continued)
    • 2017 - October through December >
      • October 5, 2017 - Uprighting the Flyer
      • October 31, 2017 - Moving Indoors
      • November 16, 2017 - Priming
    • 2018 - January - March >
      • January 9, 2018 - Laying up the Topsides
      • January 25, 2018 - Two Weeks of Working on the Topside
      • February 6-15, 2018 - Veneering the Topside (cont)
      • February 22, 2018 - A third Layer of Veneer on the Sides
      • March 1, 2018 - Adding the Final Layer on the Port Side
      • March 8-30, 2018 - Finishing the Sides
    • 2018 - April through June >
      • April 1-10, 2018 - Priming the Underside
      • April 15, 2018 - The Engine Arrives
      • April 22, 2018 - Fitting The Engine Compartment Hatch
      • May 17, 2018 - Developing the Cockpit
      • June 14, 2018 - Adding to the Final Layer
      • June 22, 2018 - Continuing the Final Layer
      • June 29, 2018 - Drive Components
    • 2018 - July through August >
      • July 12, 2018 - Final Strips on the Topside
      • July 19, 2018 - Seat Construction and Sanding the Final Layer
      • July 26, 2018 - Many Things
      • August 2, 2018 - Details
      • August 16, 2018 - Finishing the Dash
      • August 23, 2018 - Trimming the Cockpit
    • 2019 - February through March >
      • February 1, 2019
      • February 27, 2019
      • March 9, 2019 - Exhaust and Steering
      • March 30, 2019
    • 2019 - April through June >
      • May 21, 2019 - Progress
    • 2019-July through September >
      • August 1, 2019 - The Trailer
      • September 1, 2019 - Launch Test
    • 2019-October through December >
      • October 20, 2019 - Open Water
    • 2020 - January through March >
      • January 1, 2020
Today we glued more frames aft of the step to the keelsons and also glued the aft portion of the keel to the frames. The forward frames will be glued some time soon. The frame supports for the cockpit and the engine compartment hatch were also glued to the frames. At the end of the day, we determined the location where the stern will attach to the transom. 


Back
© 2022 All Rights Reserved johnpconover PHOTOGRAPHY . About .Contact (303)828-7952
  • Home
  • About
  • Galleries
  • Crandall Flyer
    • 2016 - October through December >
      • October 25, 2016 - Milling Lumber for the Jig
      • November 1, 2016 - Building the Flyer Jig
      • November 8, 2016 - Frame Construction
      • November 15, 2016 - Cutting Frame Pieces
      • November 29, 2016 - Working with Patterns
      • December 6, 2016 - Assembling a Frame
      • December 13, 2016 - Keels and Stringers
      • December 27, 2016 - Bending the Wood
    • 2017 - January through March >
      • January 10 - 24 - Continuing with Frames
      • February 14-15, 2017 - Keels and Beams
      • February 21, 2017 - Attaching Beams to Frames
      • March 7, 2017 - Gluing Up
      • March 14, 2017 - Gluing Frames to Keels and Keelsons
      • March 21, 2017 - Attaching Laminated Battens
    • 2017 - April through June >
      • April 6, 2017 - Scarfing Battens
      • April 13, 2017 - Preparing the Long Stringers
      • April 20, 2017 - More Grooves and Port Long Stringer
      • April 27, 2017 - Points at both ends
      • May 4, 2017 - Reinforcement for the engine compartment
      • May 11, 2017 - Port Stringer and Forward Battens
      • June 1, 2017 - Flipping the Boat
      • June 22, 2017 - Uprighting the Flyer
    • 2017 - July through September >
      • July 1 - 15, 2017 - Finishing the Frame
      • July 20 - 27, 2017 - Veneering the Flyer
      • August 31, 2017 - Adding a Second Layer
      • September 7, 2017 - Starboard Second Layer
      • September 14, 2017 - Port Side Second Layer
      • September 21, 2017 - Adding a Third Layer
      • September 28, 2017 - Adding a Third Layer (continued)
    • 2017 - October through December >
      • October 5, 2017 - Uprighting the Flyer
      • October 31, 2017 - Moving Indoors
      • November 16, 2017 - Priming
    • 2018 - January - March >
      • January 9, 2018 - Laying up the Topsides
      • January 25, 2018 - Two Weeks of Working on the Topside
      • February 6-15, 2018 - Veneering the Topside (cont)
      • February 22, 2018 - A third Layer of Veneer on the Sides
      • March 1, 2018 - Adding the Final Layer on the Port Side
      • March 8-30, 2018 - Finishing the Sides
    • 2018 - April through June >
      • April 1-10, 2018 - Priming the Underside
      • April 15, 2018 - The Engine Arrives
      • April 22, 2018 - Fitting The Engine Compartment Hatch
      • May 17, 2018 - Developing the Cockpit
      • June 14, 2018 - Adding to the Final Layer
      • June 22, 2018 - Continuing the Final Layer
      • June 29, 2018 - Drive Components
    • 2018 - July through August >
      • July 12, 2018 - Final Strips on the Topside
      • July 19, 2018 - Seat Construction and Sanding the Final Layer
      • July 26, 2018 - Many Things
      • August 2, 2018 - Details
      • August 16, 2018 - Finishing the Dash
      • August 23, 2018 - Trimming the Cockpit
    • 2019 - February through March >
      • February 1, 2019
      • February 27, 2019
      • March 9, 2019 - Exhaust and Steering
      • March 30, 2019
    • 2019 - April through June >
      • May 21, 2019 - Progress
    • 2019-July through September >
      • August 1, 2019 - The Trailer
      • September 1, 2019 - Launch Test
    • 2019-October through December >
      • October 20, 2019 - Open Water
    • 2020 - January through March >
      • January 1, 2020